Setting the Foundation for OT Cybersecurity Part 8: Measures That Are Free
The attackers who tampered with water system controllers in Canada and the US over the past year did not need a zero-day or a large budget. The Canadian Centre for Cyber Security says the campaign behind those attacks relies on weak, default or absent passwords.
Most security programs for existing buildings and plants move at the speed of procurement. Risks get ranked, budgets get approved, vendors get selected and onboarded, and a year can pass before a project starts. None of that stops your operations team from closing the doors attackers use today. The measures below cost staff time and some vendor coordination, not capital.
What your team can do this month
- Remove shared and guest accounts. Disable generic logins such as "operator", "admin" or "guest" on OT workstations and in the OT applications. Shared accounts make it impossible to know who changed a setpoint, and they never get disabled when someone leaves.
- Give every person and every vendor their own account. Start with the OT applications if the workstation operating system is harder to change. When a contractor's engagement ends, you disable one account instead of changing a password that ten people know.
- Change default passwords everywhere you can reach. That includes controllers, HMIs, network switches and remote access appliances, not only workstations. CISA, the FBI, the EPA and the Department of Energy put this second on their list of primary mitigations for OT in May 2025, because the attacks they were seeing used default or easily guessed passwords.
- Turn on multi-factor authentication where the system supports it. Many older BAS and SCADA applications do not. Where they do not, put MFA on the remote access path into the OT network instead, which is the door that matters most.
- Keep OT workstations for operations only. No email, web browsing or personal use. If staff need those, give them a separate device. A workstation that only runs the building has far fewer ways to be compromised.
- Remove software that does not belong. Uninstall third-party applications from OT workstations. Pay attention to remote support tools such as VNC or TeamViewer that a vendor installed years ago. The pro-Russia hacktivist groups in the December 2025 joint advisory, co-sealed by the Canadian Centre for Cyber Security, got in through exposed VNC with weak or no passwords.
- Enable screen lock and session timeouts. On the workstation and in the application, if it has the feature.
- Close ports and services you do not use. Disable unused communication ports on workstations, and insecure protocols in the OT applications where the vendor confirms operations will not be affected.
Where these measures meet reality
Some of these changes will break something. A vendor's service tool may depend on a shared account, or an integration may use a port you thought was unused. Do not make OT changes on a Friday afternoon without the vendor. Schedule them during regular maintenance visits, change one thing at a time, and confirm you can roll back.
Expect a vendor to tell you a controller cannot have its default password changed, or that MFA is not supported. Write that down. It becomes a finding for your gap list and a requirement for the next contract or replacement, which is how Part 7's contract inventory pays off.
Free does not mean unmanaged. Each measure belongs in your cybersecurity policy from Part 1 as a standard practice, with an owner and a way to check it: an internal walkthrough, a site audit or an external assessment. Regulators expect the same. NIS2 lists basic cyber hygiene and multi-factor authentication, where appropriate, among the risk-management measures for essential and important entities in the EU.
Policy alone will not change habits on a night shift. Leadership has to explain why these changes matter, give operators time to make them, and back them when a vendor pushes back.
Measure before you start
Count three things today: shared or generic accounts on OT systems, devices still on default passwords, and remote access tools you did not install. Count them again in ninety days. If the numbers have not moved, the problem is ownership, not budget.
The cheapest control in OT is the one that removes a door an attacker was already using.
Next in this series: incident response and recovery for OT.
Frequently asked questions
What are free OT cybersecurity measures?
Account, password and software changes that cost staff time, not capital: remove shared accounts, change default passwords, turn on MFA, remove software that does not belong and close unused ports.
Can these changes break OT systems?
Yes. A vendor tool may depend on a shared account, or an integration may use an unused port. Change one thing at a time during maintenance visits, with the vendor, and confirm you can roll back.
How do I know the measures are working?
Count shared accounts, default-password devices and remote access tools you did not install today, then again in ninety days.
Other articles in this series
Planning a new smart building or plant, upgrading the systems in an existing one, or buying technology for a facility? Actimeta is an OT cybersecurity and technology advisory firm that helps owners get the design, the vendors and the security right from the start.
Book a free consultation
References
- CISA, FBI, EPA and DOE, Primary Mitigations to Reduce Cyber Threats to Operational Technology (May 6, 2025): https://www.cisa.gov/resources-tools/resources/primary-mitigations-reduce-cyber-threats-operational-technology
- FBI, CISA, Canadian Centre for Cyber Security and partners, Pro-Russia Hacktivists Conduct Opportunistic Attacks Against US and Global Critical Infrastructure, AA25-343A (December 2025): https://www.cyber.gov.au/about-us/view-all-content/alerts-and-advisories/pro-russia-hacktivists-conduct-opportunistic-attacks-against-us-and-global-critical-infrastructure
- Canadian Centre for Cyber Security, Cyber threat actors use artificial intelligence in an active global campaign to disrupt internet-exposed programmable logic controllers (September 8, 2026): https://www.cyber.gc.ca/en/news-events/cyber-threat-actors-use-artificial-intelligence-active-global-campaign-disrupt-internet-exposed-programmable-logic-controllers
- Directive (EU) 2022/2555 (NIS2), Article 21: https://eur-lex.europa.eu/eli/dir/2022/2555/oj/eng