October 30, 2026

OT Cybersecurity Monitoring: Why Assessments Aren't Enough

OT Cybersecurity Monitoring: Why Assessments Aren't Enough

Why Is OT Cybersecurity Monitoring Important? Your Last Assessment Is Already Out of Date

A penetration test tells you how your network looked on the days the tester was on site.

The week after, a contractor plugs in a laptop to update a chiller sequence. A firewall rule goes in "temporarily" for a commissioning project. A vendor adds a cloud connector to a lighting panel. None of it appears in last year's assessment report, and none of it will appear in next year's until someone goes looking.

Point-in-time work has value. An assessment or a penetration test finds structural weaknesses and sets your priorities. Continuous monitoring answers a different question: what changed, and who changed it?

What point-in-time work misses

Dragos's 2026 Year in Review, drawn from its own customer engagements, gives a sense of the gap. Only 46% of its assessments found adequate OT network monitoring in place. In 30% of its incident response cases, the first sign was an operational problem the owner could not explain. And 82% of organizations had no clear criteria for when an operational anomaly should trigger a cyber investigation.

Dragos also reports an average ransomware dwell time of 42 days in OT environments, against 5 days to detect and contain for organizations with comprehensive OT visibility. Treat the comparison with care: it is vendor data, and organizations with that level of visibility tend to be mature in other ways too. The direction is still the point. You cannot respond to what you cannot see.

Process alarms are not security monitoring

The attacks on French supermarket refrigeration in October 2026 show the difference. Refrigeration systems have temperature alarms. Even so, units in hundreds of stores reached temperatures as high as 50°C overnight, and the food was thrown away. Le Monde reported that attackers extended defrost cycles to delay alarms. Investigators had not confirmed that at the time of writing, but CERT-FR's alert told operators to review their full configuration, especially defrost schedules.

A process alarm tells you something is wrong with the process. It does not tell you that a schedule was changed at 11 p.m. from an address outside your network. Security monitoring does. You need both, and a third layer is cheap: an independent temperature sensor with its own alarm, which keeps working when the controller has been tampered with. Germany's BSI, responding to the same attacks, told operators to start by cutting direct internet access to their controllers.

What to watch in OT

You do not need to inspect every packet. Focus on the events that change what the process does or who can reach it:

  • Boundary traffic. New connections between OT and the internet or the business network.
  • Remote access. Sessions outside approved windows, or connections that bypass your gateway.
  • Writes and downloads. Configuration changes, setpoint writes, firmware updates and controller logic downloads, especially from hosts that do not normally send them.
  • New assets. Devices that appear on the network without a work order.
  • Authentication. Failed logins and new accounts on HMIs, servers and engineering workstations.

The part the sales pitch leaves out

Monitoring produces alerts. Someone has to read them, know whether a BACnet write at 2 a.m. is a scheduled override or an intrusion, and have the authority to call the vendor or disconnect a link. If nobody on your side can do that, a monitoring platform is a cost with no benefit.

Before you buy, answer four questions in writing:

  1. Who reviews alerts, and during which hours?
  2. Who in operations can confirm what "normal" looks like for each system?
  3. What finding triggers a call to the site, and who makes the call?
  4. Who can isolate a system, and what does the site do once it is isolated?

A managed service provider can cover the first question. It cannot cover the second without your people. Budget for that time, on top of the subscription.

Start smaller than you think

A passive capture at your OT boundary, reviewed every week with free tools such as Zeek or Malcolm, will teach you what normal looks like on your network. That knowledge makes any platform you buy later faster to tune. Tune before you scale: an untuned system that raises hundreds of alerts a day trains your team to ignore all of them.

Ask your team one question this week. If a controller's schedule changed at 2 a.m., who would know by 8?

Frequently asked questions

Why is OT cybersecurity monitoring important?

A penetration test or assessment shows how your network looked on the days it was done. Monitoring answers a different question: what changed, and who changed it? You cannot respond to what you cannot see.

What is the difference between process alarms and security monitoring?

A process alarm tells you something is wrong with the process. It does not tell you that a schedule was changed at 11 p.m. from an address outside your network. Security monitoring does, and you need both.

What should you watch in OT?

Focus on boundary traffic, remote access, writes and downloads, new assets and authentication events. These are the events that change what the process does or who can reach it.

What should you decide before buying an OT monitoring platform?

Who reviews alerts and when, who in operations can confirm what normal looks like, what finding triggers a call to the site, and who can isolate a system. Answer these in writing, and budget for your own people's time on top of the subscription.

Related reading

Planning a new smart building, upgrading the systems in an existing one, or buying technology for a facility? Actimeta is an OT cybersecurity and technology advisory firm that helps owners get the design, the vendors and the security right from the start. Our consulting team covers incident response and business continuity planning and, with trusted partners, sensor-level monitoring and detection and tabletop exercises. Our procurement advisory services help you compare vendors before you sign a purchase order. Our project management team oversees implementation through to commissioning. Book a free consultation to talk through your project.

References

‍

Author:
Editorial Team