Importance of OT Cybersecurity for Critical Manufacturing: Most Lines Stop Before an Attacker Touches a PLC
On March 1, 2022, Toyota stopped all 28 production lines at its 14 plants in Japan for a day. Its own systems were working. A supplier of interior parts and air conditioning units, Kojima Industries, had found a virus and a threatening message on a server. Kojima said its physical production equipment was not affected. Toyota stopped anyway, because a just-in-time line cannot run when a supplier's ordering and delivery systems go down.
That pattern repeats across manufacturing incidents, and it changes what OT cybersecurity means for a plant.
Four incidents, one pattern
- Asahi Group, 2025. Asahi reported a cyberattack on September 29, 2025. It said its production systems were not affected, yet its Japanese breweries stopped because they could not process orders or ship. From October 1, staff took orders by phone and processed them by hand, and all six breweries restarted on October 2, producing a reduced range. Asahi planned to resume shipping all products on April 7, 2026, more than six months after the attack.
- Jaguar Land Rover, 2025. JLR's UK plants were offline from the end of August until a phased restart on October 8. The company reported £196 million in cyber-related costs for the quarter. The UK government guaranteed a £1.5 billion loan to support JLR's supply chain, and the Cyber Monitoring Centre estimated the total impact at £1.9 billion across more than 5,000 UK organizations.
- Mackay Sugar, 2026. In June 2026, Australia's second-largest raw sugar producer halted milling and cane haulage at two of its three Queensland mills after a cyberattack. One mill resumed limited manual crushing two days later. Dragos found no evidence that the attackers reached control systems, and said it was unclear whether the shutdown came from the attack or from containment.
- Fairlife, 2026. In a July 16, 2026 filing, Coca-Cola disclosed a ransomware incident at its Fairlife dairy business that reached systems including production-related systems. Fairlife suspended US production. Canadian production was not affected.
In each case, the line stopped because of what it depends on: order management, scheduling, shipping, identity and the decision to contain. Dragos's analysis of the second quarter of 2026 counted 747 ransomware incidents against manufacturers, 65% of the 1,140 incidents involving industrial organizations. The counts come from leak sites and public disclosures, so they reflect claims, not confirmed OT impact. Dragos's researchers wrote that the risk is shaped "less by novel ICS-specific malware" and more by attacks on the enterprise IT that supports OT.
What this means for your plant
Protecting PLCs still matters. Their protocols rarely authenticate commands, and a reachable controller is a controllable one. But if you only secure the control network, you protect the line from the least likely way it will stop.
- Map the dependencies. For each line, list every system it needs from IT to run: MES, ERP, recipe management, labelling, quality records, the historian, domain authentication. Mark which ones stop production within an hour, a shift or a week.
- Define a minimum operating mode. Decide how the plant runs without those systems, as Asahi did with phone orders. Keep local copies of recipes and work instructions, and paper batch records your quality team will accept. Test it on a quiet shift.
- Decide shutdown criteria before you need them. Mackay Sugar shows how hard it is to tell, in the moment, whether you are stopping for the attack or for caution. Agree in advance who decides, on what evidence, and what has to be true to restart.
- Separate sites and regions. Fairlife's Canadian production kept running while its US plants stopped. Shared identity, file servers and remote access between plants turn one incident into a company-wide one.
- Ask your critical suppliers about recovery. Kojima and JLR show that a supplier's outage is your outage. Ask how long they would take to restore order processing and shipping, and write the answer into your contingency planning.
- Back up controller logic offline. Keep current PLC programs, HMI projects and drive parameters off the network, and restore one each quarter to prove the backups work.
Where regulation applies
The EU's NIS2 Directive lists manufacturing of medical devices, electronics, electrical equipment, machinery, motor vehicles and other transport equipment among its "other critical sectors" in Annex II. In the US, CISA treats critical manufacturing as one of 16 critical infrastructure sectors, covering primary metals, machinery, electrical equipment and transportation equipment. Canada's Critical Cyber Systems Protection Act does not name manufacturing among its vital services, and at the time of writing its obligations had not yet come into force. In Canada, a manufacturer's cybersecurity expectations come mostly from customers, insurers and its own board.
The useful question for a plant manager is not whether an attacker can reach the PLCs. It is how many shifts the line can run if the office network goes dark tonight.
Frequently asked questions
Why does OT cybersecurity for critical manufacturing matter?
Most lines stop because of what they depend on: order management, scheduling, shipping, identity and the decision to contain. They do not stop because an attacker reaches a PLC. Securing only the control network protects the line from the least likely way it will stop.
What is a minimum operating mode?
It is a plan for how the plant runs without its IT systems, as Asahi did with phone orders. Keep local copies of recipes and work instructions, and paper batch records your quality team will accept, and test the plan on a quiet shift.
What should a plant do first?
Map the dependencies. For each line, list every system it needs from IT to run, and mark which ones stop production within an hour, a shift or a week.
Do regulations require OT cybersecurity for manufacturers?
It depends on where you operate. NIS2 lists several manufacturing sectors among its other critical sectors, and CISA treats critical manufacturing as one of 16 critical infrastructure sectors. Canada's Critical Cyber Systems Protection Act does not name manufacturing, and its obligations had not yet come into force at the time of writing.
Related reading
Planning a new smart building or plant, upgrading the systems in an existing one, or buying technology for a facility? Actimeta is an OT cybersecurity and technology advisory firm that helps owners get the design, the vendors and the security right from the start. Our consulting team covers incident response and business continuity planning and secure network and data architecture. Our procurement advisory services help you assess vendors, including how supplier concentration affects operational continuity. Our project management team supports new construction and retrofit projects. Book a free consultation to talk through your project.
References
- Associated Press, Toyota restarting Japan plants after malware hits supplier (March 1, 2022), via Manufacturing.net
- The Drinks Business, Asahi restarts brewing at its domestic breweries (October 2025)
- Nippon.com (Jiji Press), Japan's Asahi Breweries to fully resume shipments in April (March 10, 2026)
- BleepingComputer, Jaguar Land Rover cyberattack cost the company over $220 million (November 2025)
- ITPro, report on the Cyber Monitoring Centre's estimate of the JLR attack's financial impact (October 2025)
- SecurityWeek, Ransomware Attack Shuts Down Mills of Australia's Second-Largest Sugar Producer (June 2026)
- Dragos, Industrial Ransomware Analysis for Q2 2026 (August 10, 2026)
- The Coca-Cola Company, Form 8-K (July 16, 2026)
- Directive (EU) 2022/2555 (NIS2), Annex II
- CISA, Critical Manufacturing Sector
- An Act respecting cyber security (S.C. 2026, c. 9), Justice Laws